DATE TOOL
Recurring Date Calculator
Generate a schedule of recurring dates from any starting date. Pick a repeat rule — days, weeks, months, years, or selected weekdays — and the calculator lists every occurrence, states how it handles short months, and lets you download the schedule as CSV or an ICS calendar file.
Occurrences are spaced by calendar intervals from the first date; holidays are not applied.
A recurring date calculator answers the questions that come up constantly in planning: what are the billing dates for the next year, which Sundays fall inside this period, when is rent due if the lease started on the 31st, or what does a twice-monthly pay schedule look like from here. Instead of moving one date at a time, it builds the entire sequence in a single pass and shows you the whole pattern at once.
Enter the first date in the series, choose how often the date should repeat, and set how many dates you need — up to 100 at a time. Optionally add a stopping date so the schedule never runs past a deadline. Each result is shown with its weekday, so a schedule that lands on a weekend is obvious before you commit to it.
How to Use the Recurring Date Calculator
- Enter the first date of the series.
- Choose the repeat rule: days, weeks, months, years, or selected weekdays.
- Set the interval — for example, every 14 days or every 2 months — and how many dates to generate.
- Optionally set a date the schedule must stop on or before.
- Select "Generate schedule", then download the result as CSV or ICS if you need it elsewhere.
How the Recurring Date Calculator Works
- The first date is accepted exactly as entered.
- Each following date is produced by adding the chosen interval to the original start date, not to the previous result, so rounding never drifts.
- For weekday schedules, the calculator walks forward day by day and keeps only the dates that fall on the selected weekdays.
- Dates are checked against the optional stop date; anything beyond it is dropped from the list.
Because every occurrence is computed from the original start date, a monthly schedule does not slowly slip as months pass. The sequence stays anchored to the day of the month you chose, which matters for rent, subscriptions, and invoices.
Choosing the Interval
| Interval | How it repeats | Typical use |
|---|---|---|
| Days | Every N calendar days from the start date | Every 14 days, project check-ins, medication schedules |
| Weeks | Every N weeks on the same weekday | Weekly meetings, training sessions, weekly reviews |
| Months | Same day of the month, every N months | Rent, subscriptions, quarterly invoices |
| Years | Same date every N years | Birthdays, anniversaries, annual renewals |
| Selected weekdays | Every matching weekday from the start date | Every Monday and Thursday, all Sundays in a period |
The interval is a whole number of 1 or more. An interval of 1 with a monthly rule gives a plain monthly schedule; an interval of 3 gives a quarterly one.
Month-End, Leap-Day, and Short-Month Rules
Schedules that start on day 29, 30, or 31 run into months that do not have that day. The calculator lets you choose the behaviour instead of hiding it:
- Use the last day of the month — a 31st schedule lands on 28 February in a common year and 29 February in a leap year, then returns to the 31st.
- Skip that month — the schedule keeps the original day and only emits dates in months that actually have that day, so a 31st schedule pauses in February and returns in March.
Note: Public holidays are not applied. If a generated date falls on a local holiday, shift it with the Business Date Calculator.
Worked Examples
| Scenario | Setting | What you get |
|---|---|---|
| Rent due on the 31st, starting 31 January 2026 | Months, interval 1, last-day rule | 31 Jan, 28 Feb, 31 Mar, 30 Apr, 31 May… |
| Invoice every 14 days from 1 October 2026 | Days, interval 14 | 1 Oct, 15 Oct, 29 Oct, 12 Nov, 26 Nov… |
| Every second Wednesday, 6 dates | Selected weekdays (Wed), start mid-week | Six Wednesday dates spaced two weeks apart |
| Project check-in, 10 dates on weekdays | Selected weekdays Mon–Fri, count 10 | Ten working dates, weekends skipped automatically |
| Annual renewal every year from 15 June 2026 | Years, interval 1 | 15 Jun 2026, 15 Jun 2027, 15 Jun 2028… |
Exporting the Schedule: CSV and ICS
Once a schedule is generated, two downloads appear under the result:
- CSV — a simple two-column list of date and weekday that opens in any spreadsheet, useful for payroll sheets, content calendars, and audits.
- ICS — a standard iCalendar file with one all-day event per date. Import it into Google Calendar, Apple Calendar, Outlook, or virtually any calendar app, and the whole series arrives at once.
Files are built in your browser from the dates on screen. Nothing is uploaded, and the export contains only the schedule you generated.
Recurring Dates vs Adding the Same Number of Days
Adding the same number of days repeatedly is not the same as a calendar interval. A 30-day sequence starting 1 January steps through 30, 59, 90… and drifts against the months, while a monthly sequence stays on the same day number. Use Add Days to Date when you need one future date, and this calculator when you need the whole series.
When the rule is defined in business days — for example, a review that is due 10 working days after filing — the Business Date Calculator moves a single date correctly, and the Working Days Calculator counts weekdays across a span.
Interval Semantics: What Every N Actually Means
Each interval counts from the first date rather than from the previous occurrence, and each unit behaves differently. An interval of days counts every calendar day, weekends included: every 14 days is always exactly 14 days apart, so the weekday of each occurrence never changes. Weeks behave the same way — every 2 weeks is 14 days — which is why a weekly pattern always keeps its weekday.
Months and years are calendar units, so their length follows the calendar: every 1 month means the same day number next month, subject to the short-month rules above, and every 1 year means the same date next year, with 29 February clamped in non-leap years. Day intervals and month intervals therefore drift apart — a 30-day sequence slides through the calendar, while a monthly sequence stays on the same day number.
All of this is date-only arithmetic: each occurrence is a whole calendar day from midnight to midnight. Clock changes for daylight saving do not shift a date-only schedule by an hour, and time zones stay irrelevant until a specific time of day is attached to the event. That is what keeps a generated series stable across the transitions that complicate timestamped schedules.
Selected-Weekday Schedules in Practice
A weekday rule answers a different question from an interval rule: instead of "every N days", it asks for every date that falls on one of the selected weekdays. Choose Monday and Thursday for a twice-weekly pattern, or Monday to Friday to build a working-days-only series that skips weekends automatically.
The interval field sets the spacing. An interval of 1 with a Wednesday rule emits every Wednesday; an interval of 2 keeps every second Wednesday, which is exactly 14 days apart and therefore always lands on a Wednesday again. Because every occurrence is anchored to the first date, a Wednesday-based series can never wander onto a Thursday — the weekday column on each row makes that easy to verify at a glance.
Note: Weekday schedules still include public holidays: the rule knows about weekdays, not about national holidays. Shift individual dates with the Business Date Calculator.
Common Recurring-Date Mistakes
- Rebuilding the schedule from the previous occurrence instead of the first date. Chaining "plus one month" from a clamped 28 February takes you to 28 March and keeps you there; computing every date from 31 January returns you to the 31st as soon as the month has one.
- Using 30-day steps as a monthly rule. A 30-day sequence slides forward through the calendar and never matches a billing date anchored to the month.
- Forgetting the leap-day clamp. A 29 February anchor has a 29th only in leap years — decide up front whether those occurrences clamp to 28 February or are skipped.
- Assuming holidays are excluded. Day and weekday schedules still land on public holidays; adjust those dates separately.
- Letting a schedule run past its intended end. Set a stop date so the export cannot contain occurrences after the contract or project finishes.
Related Tools
Plan a single due date with the Deadline Calculator, see what remains until a fixed moment with the Countdown Calculator, and group a schedule into fiscal periods with the Quarter Calculator.
Method, checked examples, and limits
The first date is the anchor. Each occurrence adds a fixed number of days, weeks, months, or years, or selects chosen weekdays within each interval. Month-end dates clamp to the last valid day or skip the month, depending on the selected rule.
Assumptions
- The first date is always included.
- Intervals are measured from the first date, not from the previous occurrence.
- Weekday mode counts whole weeks from the first date.
- Holidays are not applied.
Examples you can reproduce
| Input | Result | Why it matters |
|---|---|---|
| 31 January 2026, every 1 month, clamp | 31 Jan, 28 Feb, 31 Mar, 30 Apr 2026 | — |
| 1 January 2026, every 2 weeks | 1 Jan, 15 Jan, 29 Jan 2026 | — |
| Wednesday 7 January 2026, every week on Wednesday | 7, 14, 21 January 2026 | — |
These examples were produced with the same calculation functions the tool uses. Enter the inputs above to reproduce them.
Known limitations
- Does not apply public holidays.
- Generates at most 100 dates per schedule.
- Month-end and leap-day behaviour is an explicit choice, not an automatic business rule.
Rules and definitions: RFC 5545 — Internet Calendaring and Scheduling Core Object Specification (iCalendar), ISO — ISO 8601 date and time format, IANA — Time Zone Database, NIST — Leap Seconds FAQs (leap years and leap seconds)
Read the full testing methodology, the editorial standards, or report a problem.
Related Calculators
Related Guides
Frequently Asked Questions
Does the schedule count the first date?
Yes. The first date you enter is occurrence one; every later date is spaced from it, not from the previous result.
What happens to a monthly schedule on 29, 30, or 31 in a short month?
You choose: use the last day of that month, or skip the month and keep the original day for months that have it.
Can I limit the schedule to a date range?
Yes. Set a stop date and no occurrence after it will be generated. Without a stop date the calculator generates the number of dates you asked for, up to 100.
How do I get these dates into my calendar?
Generate the schedule and use the Download .ics button. The file imports into Google Calendar, Outlook, and Apple Calendar as all-day events.
Does it account for public holidays?
No. Holidays vary by country and employer, so the calculator uses the standard calendar only. Adjust individual dates with the Business Date Calculator when holidays matter.
Is the ICS export a standard calendar format?
Yes. The file follows the iCalendar format defined by RFC 5545, the same standard used by Google Calendar, Apple Calendar, and Outlook. Each generated date becomes an all-day event, so the whole series imports in one step — and the file is built in your browser from the dates on screen.
Do clock changes or time zones affect the schedule?
No. Every occurrence is a date running midnight to midnight, so daylight saving transitions — which move clock times, not calendar dates — leave the series unchanged. Time zones only matter once you attach a specific time of day to an event, which is a job for the Time Zone Converter.